Tool Hire

0345 604 5337

240V Floor Edging Sander

Edging Sander Hire
Edging Sander Hire
Edging Sander Rental
Edging Sander And Sheets
Everyday Product Hire Guarantee

Floor Edging Sanders are ideal for confined areas and sanding right up to the edge of a floor.

Supplied complete with an RCD power breaker.

Additional Information:

Features: A hard working disc floor sander (edger) that gives unrivalled balance and feel. Features include a powerful four brush motor that drives a dynamically balanced metal backed sanding pad, wheel castors that allow easy change of direction and a high powered vacuum system.
The edging sander will sand a high quality, score-free finish on hard and soft wooden floors, including parquet and any solid wood surface that requires rapid sanding and levelling and can also be used on a wide range of other surfaces including some types of decking, fibre board, cork, composition and engineered floors.

  • Based On: Hiretech HT7 Disc Floor Sander
  • Off Load Current: 5A
  • Average Load Current: 8A
  • Noise: 100 dBA at 1M
  • Vibration: 2.71 m/s² rms
  • Motor RPM: 13,000
  • Disc RPM: 3,300
  • Dimensions W x D x H: 276mm x 505mm x 325mm
  • Weight Net: 16.4kg
  • Sanding Disc Diameter: 178mm

Sanding Tips:

Before sanding, empty the room completely of furniture and remove any old floor coverings, nails and anything else that is attached to the floor, then vacuum and clean the room thoroughly. Basically, you want an empty clean surface to start working on.

Inspect the floor closely, drive in all nail heads and remove any carpet staples or fasteners from former flooring to avoid tearing the sanding sheets.

If your floor needs a lot of sanding, start with the coarse (P40 Grit) sanding discs, for a floor in a better condition, the medium (P80 Grit) sanding discs are better.

Use the edging sander to get closer to the skirting boards where the floor sander can't reach. Because these sanders use a disc that sands across the grain, you might need to use a finer grit paper than the one you used with the floor sander.

Sanding a floor always produces a lot of dust (even though the machines have dust bags), so always wear goggles and a face mask to avoid inhaling the dust, ventilate the room by opening windows and seal around the door (to prevent the dust from getting into the rest of the house). Sanders are also noisy, so ear protection should also be worn.

Do not let the dust bag fill more than halfway before changing, otherwise the additional weight of the dust bag negatively affects the sanding of the floor.

The Floor Edging Sander does not come complete with sanding discs or dust bags, please remember to add these when placing your order.

It is advisable to order at least 3 of each grit of sanding disc per room and at least 2 dust bags per room (unused discs and bags can be returned and monies refunded).

Everyday Hire Guarantee Product 110V Item 240V Item  LOW Vibration Rated Item RCD Power Breaker Required Hearing Protection Required Breathing Mask Required Eye Protection Required Hand Protection Required Item Can Be Transported By Car Available For Collection From Branch Available To Order Online Order By Phone 0345 604 5337
Code 350255
Item 240V Floor Edging Sander
Same Day £23.99
+ Day £8.00
Weekend £31.99
Weekly £39.99

Useful Information

Near Me
Order and Collect

Awards & Accreditation