Fence Post Puller - Hydraulic

Post Puller
Post Puller
Post Puller
Post Puller
Post Puller
Post Puller
Post Puller

Also know as "The Fence Master Post Removal System" and is designed to take the strain and hard work out of removing fence posts of all shapes and sizes.

With a operating mass of 100kg it is only to be used for the pulling of posts from the ground and must not be used for the lifting or lowering of loads, or for any other purpose. Long posts should be cut off first just above the post rest, to prevent injury.

How to remove a post using the Fence Post Puller:

Set the adjustable handle at the top of the machine spine to the desired height and fit the locking pin. Wheel the Post Puller into position making sure it is central to the post with the post rest close to the post with the arm fully lowered, ensuring the Post Puller is both level and stable, with both front feet resting firmly on the ground (do not operate unless both feet are resting on a firm base). Wrap the bottom chain anticlockwise around the post twice, then, making sure the chain is as tight as possible, secure the chain through the slot in the post rest. Pull the top chain as tight as possible around the post and secure through the top slot in the post rest.Turn the pressure release knob on the pump clockwise until tight and then start to operate the hand pump checking that the post begins to move when pressure is applied and continue pumping until the post is removed. If the post does not continue to move during operation, make sure the post footing is not fowling under the legs of the Post Puller, if this is the case then turn the release screw anticlockwise slowly to release pulling pressure, remove the chain and reposition the machine and start again. It is not always necessary to pump the ram all the way to the top, because once the ground seal is broken the post and footing can usually be removed very easily. Make sure that the post is firmly resting on the post rest then pull the handles toward you, taking care to ensure you keep clear of the post as you pull it towards you. Tilt the machine over until the machine is resting on its wheels and the post is clear of the hole. Turn the Post Puller until the post and footing are clear of the hole, then gently lower the machine to rest on the ground. With the Post Puller resting on its base on level ground, turn the pressure release knob slowly anti clockwise to release pressure, once hydraulic pressure has been released and the chain is slack, whilst supporting the post, remove the chains from the slots and unwrap them from the post ( for larger posts a second person may be required to hold the post). The post can now be safely removed. Push down on the hood to lower the arms to the fully down position, the Post Puller is now ready for use again.

Head Protection Required Eye Protection Required Hand Protection Required Foot Protection Required Item Can Be Transported By Transit Van Order By Phone 0370 99 00 999
Code 140083
Item Fence Post Puller - Hydraulic
Same Day £48.00
+ Day £16.00
Weekend £64.00
Weekly £80.00

Useful Information

Branch locations
Aberdeen
Ashford
Barnsley
Birmingham
Brighton
Bristol
Canning Town
Cannock
Canterbury
Cardiff
Carlisle
Chessington
Chesterfield
Colchester
Coventry
Croydon
Dartford
Derby
Edinburgh
Exeter
Folkestone
Gateshead
Gillingham
Glasgow
Greenford
Heathrow
Huddersfield
Hull
Leeds
Leicester
Liverpool
Long Eaton
Loughborough
Maidstone
Manchester
Mansfield
Margate
Melton Mowbray
Middlesbrough
Newcastle
Northfleet
Norwich
Nottingham
Peterborough
Plymouth
Sheffield
Shrewsbury
Sittingbourne
Skipton
Southampton
Stevenage
Stoke
Strood
Swansea
Telford
Tonbridge
Tower Bridge
Warrington
Aberdeen
Ashford
Barnsley
Birmingham
Brighton
Bristol
Canning Town
Cannock
Canterbury
Cardiff
Carlisle
Chessington
Chesterfield
Colchester
Coventry
Croydon
Dartford
Derby
Edinburgh
Exeter
Folkestone
Gateshead
Gillingham
Glasgow
Greenford
Heathrow
Huddersfield
Hull
Leeds
Leicester
Liverpool
Long Eaton
Loughborough
Maidstone
Manchester
Mansfield
Margate
Melton Mowbray
Middlesbrough
Newcastle
Northfleet
Norwich
Nottingham
Peterborough
Plymouth
Sheffield
Shrewsbury
Sittingbourne
Skipton
Southampton
Stevenage
Stoke
Strood
Swansea
Telford
Tonbridge
Tower Bridge
Warrington
Order and Collect

Order & Collect

Please note

Our order and collect service is available on all orders placed online, on the phone or in the local branch. However, you may not get the same special offers and prices as advertised on this site.

Our branch staff will show you how to use the machine in the branch, but please also note the hirer should collect so he / she knows how to use the equipment.  If you are collecting from us on behalf of someone else, please be aware we cannot be held responsible for any operating errors or faults.

When collecting from a local Hire Station branch please make sure you take two forms of ID and one must be photographic.  Hire Station may also require a deposit when you collect, so please ensure you take a credit card. Deposits will of course be returned when you return the item back to the branch.

You can return the equipment you hire to ANY Hire Station branch.

Awards & Accreditation