Warehouses and workshops

To enable operators in locations equipped with forklifts or other forms of Mechanical Handling equipment to operate those machines following training to a suitable national standard. Course takes between 1 and 5 days to complete depending on prior experience.

The GE105 is a direct fired oil heater and is commonly used for localised heating in workshops, foundries and construction.

The GE36 is a direct fired oil heater and is commonly used for localised heating in workshops, foundries and construction; the unit also lends itself to certain horticultural and agricutural applications.

The GE46 is a direct fired oil heater and is commonly used for localised heating in workshops, foundries and construction; the unit also lends itself to certain horticultural and agricutural applications.

The GE65 has the usual built-in electronic control box for automatic ignition, together with the flame control sensor and overheat thermostat; the AISI 430 stainless steel combustion chamber is protected by a post - ventilation cooling down process.

The Confort 35 has an output of 32kW (109,189 BTU/hr) & is commonly used in workshops & horticulture. The Confort 35 has a built in electronic control box, intergral room thermostat for automatic ignition and temperature control, a flame control sensor and overheat thermostat.

The Confort 70 has an output of 66kW (225,201 BTU/hr) & is commonly used in workshops & horticulture. The unit is fully ERP 2018 Compliant and has a built in 110 litre fuel tank. This unit can also be used as a ventilation unit in warmer weather.

Also known as a Plug and Play Cabinet Heater, the Confort 100 has a built in electronic control box, intergral room thermostat for automatic ignition and temperature control, a flame control sensor and overheat thermostat.